192.168.0.30 Default login IP address used to access router settings in factory mode for first-time configuration. 192.168.0.1 most used default IP address used by many leading brands such as Netgear, Arris, Dlink, and TP-Link. A couple of router brands and model numbers use 192.168.O.30 as the default login IP address such as D-Link DWL-810, TRENDnet TV-IP300W, as well as many others.
Default LAN IP address 192.168.0.30 pre-configured as the Default gateway IP address for Modem and WiFi router. Apart from the login IP address you also required a 192.168.o.30 password and username to access settings in a default mode from a browser. The default username and password for the Router and DSL modem are printed on the router sticker.
A wired physical connection with the router to a desktop or laptop is required if you want to use a cable connection. You can also use Wireless SSID and password to access using wireless settings. Login Username and password might be different for each brand and model number that is available on the router table and the quick user manual included with the box. Also, find the default login credential for 192.168 0 30 IP address with different brands works.
Find default login Ip address and username password available on router sticker with brands name, modem number, and other device details. If you are unable to find the login password for your modem or router, try the below combination that works with most of the brands.
Username | Password |
admin | admin |
admin | Blank |
admin | NA |
user | user |
admin | password |
In some router brands only the password option is available so if you just find it on the box to log in can use the password only.
You can access router settings from a mobile or computer browser that depends on the interface supported. Some leading brands also provide apps to set up devices without accessing using IP addresses.
Router preconfigured with default WiFi name and password and some brands defaults wifi is open without any key so its important to change WIFI name and update Wireless password during first time setup. If you looking to update your OLD wifi password then you can also follow these steps.
Go to the Wireless tab from the settings menu.
Wireless Settings- Basic Settings
Wireless Radio- Enable
Wireless Network name (SSID)– WiFi-Home (create SSID as you want to use)
Channel– Auto
Channel Width– Auto
WiFi Password- WPA/WPA2_PSK_AES
WiFi key– create a WIFI password here.
Save Apply settings and connect again with a new update Wireless name and password for further settings
If above steps not working for you as simple as they appear in the manual and you facing any error while trying to access the login page or are unable to access the 192.168.0.30 IP address then follow the steps below.
To solve the IP address not working or taking a long time to respond first confirm the below points
If you got a login page but can not access settings because of the wrong username or password error.
There is the only way to restore the login password is by making the router factory reset. Making router reset to erase all configuration so you have to setup the router again or if you have a configuration backup file use the same to restore the post reset process.
192.168.200.1 Login Router Admin Password 192.168.200.1 C class IP address used as default login IP…
Arris G36 Vs Netgear Cax80 Review, Price and Troubleshooting It's very hard to pick the…
How to Solve if Eero Blinking White? Eero is a mesh whole home Wi-Fi system…
Dual Wan Router For Home and Office Best Multi WAN router in 2024 to use…
AC750 Vs Ac1200 Which one is Best? You probably see AC750 and Ac1200 while thinking…
How To Reset Hughesnet Router if Forgotten Login Password? Resetting a Modem or router is…