Netgear C3000 Gigabit Cable modem with N300 WiFI for cox cable internet connection. Netgear C3000 supports Two Gigabit Ethernet ports 1 USB 2.0 and 1 Coaxial port for cable internet. It is a CableLabs® DOCSIS® 3.0 Certified to work with cable Internet providers TWC, Century link, XFINITY® from Comcast, Spectrum®, Cox®, Cablevision, and more. You probably required to login Netgear C3000 cable modem from time to time to update the WiFI name as well as the WiFI security key.
Netgear C3000 gigabit cable modem with inbuilt WiFI up to 300Mbps speed for gaming and live streaming. You can connect two wired network devices such as Desktop, DVR/NVR, or any other wiFI Access Point. As C3000 Cable modem with Wireless option so you get two way to login Netgear cable modem either using Wired connection or wifi connection. For the first time, you can use Netgear c3000 router admin login with default username and password printed to modem sticker and quick user manual included with the device. if your C3000 WiFI cable modem already configured and want to update only wireless settings then use login password and IP address as configured during the first-time installation. If you are trying to log in for a modem the first time just follow the steps below.
Although C3000 modem default login IP address, Login URL, and username password printed to sticker and you can check same.
Netgear C3000 Docsis Modem Login Defaul IP– 192.168.0.1
Login URL– routerlogin.net
Default Username– admin
Netgear n300 default password- password
Get login detail from your modem sticker or if already changed default login settings get ready with it and follow steps to log in.
Internet service provider installed cable modem during first time installation of internet connection but if you want to replace the old cable with Netgear C3000 WiFI cable modem then you have to connect each cable in a proper way.
How to Find Netgear Router login IP Address ?
Netgear AC1000 Setup and Login First time [R6080]
Open a web browser and access http://routerlogin.net or http://192.168.0.1 and wait to load Netgear genie modem login page. Provide username “admin” and password “password” for Netgear n300 c3000 for the first-time login and if already changed login password use same.
Once you are logged in to the C300 web interface now first you have to activate your internet connection.
Visit the internet provider site to create an account and provider modem Mac address, serial number and other information to activate your internet. After activating the internet connection your modem dashboard will show Internet Active status and you can set up further configurations.
The first important configuration is to change the default wireless SSID network name and password during the first-time Netgear c3000 set up to protect your internet from unauthorized access.
In the left side menu, go to the Setup- Wireless setup option.
Wireless Network (2.4GHz B/G/N)
Name (SSID)- Netgear-C3000 (create new wifi name as per your choice)
Channel – Auto or use 1 or 6 or 11
Mode- up to 300Mbps
None- no password set
Choose WPA2-PSK (AES)
Passphrase– C3000-password (create a new strong password for your modem WiFI network).
Press Apply button to confirm settings. If you are using a WIFI network to log in to Modem you will be disconnected from wifi after updating your SSID name and password. Connect again with a new name and password.
The next important step to change the default login password if you still using an old password or default login password as a configured new modem.
To change the password you have to access management settings from the Advanced menu. Follow steps.
In the Basic home Display navigate “ADVANCED > Administration > Set Password”
Old Password- admin (default)
Set PASsword- New Login Password as per your choice.
Repeat New Password- type new password again to confirm.
Press Apply Settings to save configurations.
Do not –
If gettings issue while accessing login page from mobile, PC or Laptop device. follow the troubleshooting steps to fix login problems.
If you are using an OLD modem and not sure what is login IP address username and password you configured before then you can use the reset button to factory reset the modem.
Find a small reset button in the modem and press the button for 5-10 seconds and release. After a few minutes router will reset into default mode and login IP details printed to the sticker will work. Router
192.168.200.1 Login Router Admin Password 192.168.200.1 C class IP address used as default login IP…
Arris G36 Vs Netgear Cax80 Review, Price and Troubleshooting It's very hard to pick the…
How to Solve if Eero Blinking White? Eero is a mesh whole home Wi-Fi system…
Dual Wan Router For Home and Office Best Multi WAN router in 2024 to use…
AC750 Vs Ac1200 Which one is Best? You probably see AC750 and Ac1200 while thinking…
How To Reset Hughesnet Router if Forgotten Login Password? Resetting a Modem or router is…