Trendnet TEW-652BRB is a single band 2.4Ghz wireless router with up to 300Mbps wireless speed. Login and setup Trendnet Tew 652 Brp Wifi router first time required as per your broadband internet settings or if you want to connect to your cable modem. Trendnet TEW-652BRP is a broadband router without modem support and it comes with a 4LAN port and 1WAN port.
Trendnet TEW-652BRB is a single-band wifi router with 2 Omni Antenna for better wifi range and stable connectivity. Trendnet 652brb supports a 100Mbps LAN port so if your internet plan Is 100+ Mbps then you should go with Trendnet TEW-810DR ac750 dual-band or Trendnet TEW-811DR 1200mbps Dual-band WIFI router. This article will help you to log in to Trendnet Tew 652 Brp using a wireless or wired connection from the PC/Laptop or mobile device for first-time setup.
Before proceeding to Trendnet router login you should know the basic speciation and review for the Tew 652brb router if you looking to buy one router for your wifi internet.
TEW-652brb router single band router supports up to 300mbps wireless speed and 100mbps fast ethernet LAN port so from wired you can only get up to 100mbps speed.
TEW-652BRB N300 | Hardware & Software Specifications |
Wireless speed | 2.4Ghz single band 300Mbps |
LAN Port | 4x100mbps LAN port |
WAN port | 1x100mbps |
Power | 7.5V DC, 1A external power adapter |
Frequency | 2.412~2.484GHz band |
Antenna | 2 x 2dBi fixed dipole antennas |
WiFi Security | WEP(HEX/ASCII): 64/128-bit WPA(AES/TKIP): WPA/WPA2-Radius, WPA-PSK/WPA2-PSK |
N300Mbps supports 300mbps wifi speed in wireless but that is used to transfer data between two devices wireless only. If you have an internet plan of more than 100mbps then you need a dual band wifi router with Gigabit LAN and WAN port so you can get more than 100Mbps wireless and wired internet speed.
Default login IP address, username, and password required for first-time configuration of the router. Default credentials are printed on the router sticker as well a quick user guide is included with the new router.
Trendnet Default Login IP address- 192.168.10.1
Default username- admin
Default password- admin
If the “admin” password not working for your Trendnet router check the default password printed to the router sticker or if you have changed the default password already use the same updated login password.
Once you find the default login credential for your router now follow the next steps to connect and login to Trendnet router settings from a web browser. Follow the steps below for the Trendnet TEW-652 BRP router setup guide.
Eero Blinking White | How To Fix?
IF you looking first time setup your Trendnet broadband router for your internet connection then you need to get WAN settings from your ISP as per your internet type from PPPoE or Static IP type. Follow the steps to configure WAN settings.
Go to the left side option “Main”
Main- WAN
Connection Type- Static IP or PPPoE (choose as per your internet type and get details from your ISP)
If the internet type is PPPoE then provide Username and password and if the Internet type is Static IP
Then get Static IP and Gateway along with DNS server from the internet provider and save settings.
After finishing the internet settings follow the second steps to change Wireless settings.
Changing the Wireless SSID and password is also important for first-time configuration to avoid using the default password.
Go to Wireless- Basic settings
Under basic settings, you will get Wireless SSID settings.
Wireless- Enabled
SSID- TRENDnet651 (change this default SSID name and create a new WIFI name)
Channel– Auto
Channel Width- Auto
SSID broadcast- Enable
Apply settings and connect again with the new SSID to change the WiFI security key if you using a Wireless connection.
Go to Wireless- Security
Authentication Type WPA2
PSK / EAP – PSK (Select PSK)
Cipher Type- Auto ( Choose Auto)
Apply settings and Wireless configuration finish for your Trendnet Router.
Along with Wireless settings login admin password also needs to be changed.
Changing the Login password makes your router access more secure for users connecting to your wifi or wired internet.
Go to Main- Password
There are two types of users available one is an Administrator and the second is a user with limited rights.
Administrator (The login name is “admin”)
New Password – Create a new password for the Administrator account that gives full rights to the user.
Confirm Password – Confirm Login password for Admin.
Change User Account Password with limited control rights
User (The login name is “user”)
New Password – Create a New Password for a user account
Confirm Password – Confirm new password for User accounts.
Apply settings and your Trendnet N300 Wireless router ready to use an internet connection with secured and safe internet browsing.
192.168.200.1 Login Router Admin Password 192.168.200.1 C class IP address used as default login IP…
Arris G36 Vs Netgear Cax80 Review, Price and Troubleshooting It's very hard to pick the…
How to Solve if Eero Blinking White? Eero is a mesh whole home Wi-Fi system…
Dual Wan Router For Home and Office Best Multi WAN router in 2024 to use…
AC750 Vs Ac1200 Which one is Best? You probably see AC750 and Ac1200 while thinking…
How To Reset Hughesnet Router if Forgotten Login Password? Resetting a Modem or router is…